System Upgrade - XGIMI HALO+ Bedienungsanleitung

Charging Instruction
The device should be charged with an official, standardized adaptor.
Charging time will be lengthened for charging under the power-on state.
If you plug into an adapter under the powered-off state, a blinking red indicator
light represents charging while the green indicator light represents that the battery
is fully charged. (The green indicator light will extinguish after it is on for 10s.)
If your device will remain unused for long periods of time, the device should be
fully charged. Select the Power Off mode when you switch off the device. (In this
mode, the mistouch prevention feature is enabled. The power consumption is
low, and the device cannot be powered on by using a remote control. Users can
only press the device's power button twice to power on the device. Alternatively,
you can connect the device to the adapter, and the mistouch prevention feature
is disabled by default. Then, you can simply press the power button once to
power on the device.) Moreover, charge the device once every 3 months to avoid
irreversible capacity loss or damage arising from low battery. This is because the
battery will self-discharge during the excessively long storage time.

System Upgrade

The system can be upgraded only when the device has at least 50% battery power
or is connected to a power source.
Online upgrade
The online upgrade can be performed through system settings.
Note: The online upgrade can be made through system settings " "
11