Starting The Pasta Making Program - Philips Viva Collection HR2333 Bedienungsanleitung

Important!
The pasta recipes provided in the recipe book have been tested for success. If you experiment
with or use other pasta recipes, the flour and water/egg ratios will need to be adjusted to the
flour and water cup ratios included with the Pasta maker. The Pasta maker will not operate
successfully without adjusting the new recipe accordingly.
Note
y For good results, it is essential that the dough looks crumbly in the kneading chamber.
If the dough looks crumbly, the recipe will work. The recipe will not work if the dough
is too wet (looks like well-known dough consistency) or too dry (when the dough looks
like flour only).
y Seasonal changes and using ingredients from different regions may affect the flour/
water ratio. You may adjust based on the recommended proportion.
y When making gluten free pasta or cookies, do not follow the recommended liquid
amount indicated by the appliance.
y When using legume flour or gluten free flour less water is needed than the
recommendation. You may use about 10-20ml less for these recipes, but as mentioned
above, there are changes depending on the type of flour.
y "Gluten" is a binder which ensures the pasta does not break easily, Gluten free flour
does not contain a binder, therefore it needs a thickener to act as a "binder" eg. eggs
or Xanthan. Various kinds of gluten free flour perform differently when making pasta.
Some flours are not suitable for making pasta such as coconut flour, some flour types
work well, such as quinoa and buckwheat.
y When making egg pasta or vegetable pasta, make sure you whisk the egg mixture or
vegetable juice evenly with the water before pouring into the chamber through the slot
in the lid. When adding ingredients, make sure the ingredient is in a liquid form.
y See the recipe book provided for additional pasta recipe variations.

Starting the pasta making program

Important
y Do not select the extra extrusion program before the dough mixing is complete.
Otherwise, this will damage the Pasta maker and its lifetime.
y Do not disconnect the power cord before the processing is complete. If you have to
stop the pasta making process, turn the control knob to "OFF" to stop the working
process and then disconnect the power cord from outlet before performing other
operations.
y Do not exceed the maximum operation cycle of 2 cycles continuously at all applications.
To better protect the lifetime of the appliance, you can restart using the appliance after
30 minutes upon 2 continuous operation cycles.
y If you intend to use the appliance continuously, clean each shaping disc with the
supplied cleaning tool each time after the pasta making session. For easy cleaning, do
not soak the shaping disc directly in water.
1 Put the plug of the appliance into the power outlet. The Pasta maker will give a signal
sound once. (Fig. 30)
Note: Make sure all the parts are well assembled before plugging in.
2 Attach the lid onto the mixing chamber. (Fig. 31)
ENGLISH
9