Technical Specifications; Proper Disposal Of The Product - MPM MOC-01 Bedienungsanleitung

SCRIPTION). Under normal conditions, the air purifier will indicate it is necessary to replace
the filter every six months, but this time may be reduced if working conditions are demand-
ing. Replace the filter every 6 months, even if not prompted by the device.
3. While replacing the filter, clean its housing (8) with a damp cloth.
4. The UV lamp maintenance consists in replacing it every 3 years. To replace the UV lamp follow
these steps:
- Remove the filter from the device (7)
- Place the device on its side (Fig. 2)
- Remove 4 bolts holding the UV lamp housing (9)
- Rotate the lamp slightly and remove it
- Unscrew the UV lamp
- Insert and screw in a new UV lamp
- Install the UV lamp housing and secure it with 4 bolts
- Install the filter (7) in the air purifier
NOTE! Never look at a working UV lamp. Your eyesight may be damaged.

TECHNICAL SPECIFICATIONS

See the product's nameplate for technical specifications.
Power cord length: 1.70 m
CAUTION! MPM agd S.A. may change the technical features of the product without notice.

PROPER DISPOSAL OF THE PRODUCT

Poland Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be hand-
ed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste col-
lection points, the user should contact the municipal point of electric waste collection or used equipment processing de-
partment.
(waste electrical and electronic equipment)
Fig. 2
13