Connections; Connecting With An Amplifier - Technics SB-C600 Bedienungsanleitung

Connections

Connecting the speaker cables
1
2
3
Do not insert the vinyl
insulation.
Note
• Be careful not to cross (short-circuit) or reverse
the polarity of the speaker wires as doing so
may damage the amplifier.
DO NOT
08
Twist the insulation
covering the tips of
the speaker cables
to pull them out.
Turn the knobs to
loosen them, and
insert the core wires
into the holes.
Cable with a
white line
Black Red
Tighten the knobs.
• Check the colors of the speaker cables
(supplied) to connect the left and right
speakers correctly. Incorrect connection can
damage the speakers.

Connecting with an amplifier

• Before connection, turn off the amplifier and
disconnect its power cord.
• For details, refer to the operating instructions
of the amplifier.
e.g. amplifier (rear)
Speaker (right)
Note
• Do not move the speaker while the speaker
cables are connected. This may cause a short
circuit.
• When the connections are completed, pull the
speaker cables lightly to check that they are
connected firmly.
• Wire the polarity (+/-) of the terminals correctly.
Not doing so may adversely affect stereo
effects or cause malfunction.
Speaker (left)