Telephoning
Setting the earpiece/loudspeaker volume
/
Muting the microphone
Internal calls
Making an internal call
☞
Unless you explicitly de-register the pendant from the base station
(refer to page 35), it retains, even after a reset, see page 34, the internal
number 5. If you register it for new (e.g. replacement, refer to page 35) the
next free internal number will be assigned to it.
During a call you can adjust the volume in 5 levels (if tele-
phoning "normally" -> earpiece volume, with hands-free ->
loudspeaker volume).
These seperate settings will remain at the last selected
level when you end the call.
During a call you can switch your handset's microphone
off. The display shows MUTED.
To unmute press the key again.
Press
. If two handsets are registrated to the base
station the other handset will be called immediately (the
pendant is treated as a usual handset).
If three or more handsets are registrated to the base stati-
on their internal numbers will be displayed (for example
2 3 4 5). The internal number 5 is always the pendant.
Press the internal number you want to call.
If you press "9" in the case of several registered handsets
all will be called at the same time.
GB
19