overview
Camera
1. Adjustments
In order to put the camera into the desired position, please loosen the two fixing screws.
Then position the camera onto the desired object. Afterwards, tighten the fixing screws again
carefully.
Note:
Do not try to open the camera module!
There are no further adjustments necessary!
Finally, put the housing back on and close it by turning it clockwise. Use the allen wrench to
tighten the housing screw again.
2. Dimensions
_________________________________________________________________________________
Fixing screws for camera module
- 16 -
Bedienungsanleitung / User manual VTC-HDH210FSP
all dimensions in mm