SOLIS THERMOPAD 2260 Bedienungsanleitung Seite 83

• Push the sliding switch up one level, to the po-
sition 1. The figure "1" lights up in the display.
You can feel the heating pad warm up after a
few minutes.
• If you want a higher temperature setting, push
the switch up to the next position. The figure
"2" lights up in the display. If you want to se-
lect the maximum temperature setting, push the
switch to the uppermost position so that "3"
lights up in the display.
• Should the heating pad get too warm, push the
switch back down to the "2" or "1" position.
The pad will noticeably cool down after a few
minutes.
• If you want to switch the appliance off, push the
switch all the way down, the figure in the dis-
play goes out. Disconnect the power plug from
the power socket.
Note: The heating pad reaches the set temper-
•
ature only after approx. 15 minutes. Therefore,
check the temperature after 15 minutes with
the back of your hand to make sure that it feels
GB GB
83