Grease Filter; Charcoal Filter (Filter Version Only); Replacing Lamps - Teka DVN 67050 TTC BK Montage- Und Gebrauchsanweisung

booster is on, the LED T3 starts to flash. While the booster is
working, it is possible to switch to the first or second speed by
pressing the desired speed button T1 or T2, the booster will
turn off and the selected speed will be activated.
When the booster is on, press T3 again to turn the hood off.
After 5' the booster automatically turns off and the third speed
is automatically activated.
Timer (T4)
The timer can be activated when the first, second or third
speed is active. When the function is activated, both the LED
of the Timer (T4) and that of the previously selected speed
(T1/T2/T3) turn on with a fixed light.
The duration of the timer depends on the selected speed:
First speed T1 = duration 20'
Second speed T2 = duration 15'.
Third speed T3 = duration 10'.
The timer cannot be activated when the booster is active.
When the time expires, the hood turns off. When a speed is
timed, it is possible to switch to other speeds by pressing the
desired speed button, this operation will turn the timer off.
When a speed is timed, the timer can be deactivated by
pressing T4, or one of the other two inactive speeds. To turn
the hood off, press the speed again to which the timer had
previously been linked.
Light (T5)
The light can be activated at any time by pressing key T5.
When the function is activated, the LED turns on with a fixed
light.
Filter setting
Activation or deactivation of the filter indicators is only
possible with the hood off.
To access the configuration menu, hold pressed T2+T3, once
inside the menu T1 will start to flash.
The default setting is:
− grease filter indicator (T2) on, therefore active;
− odour filter indicator (T3) off, therefore not activated.
T2 activates/deactivates the grease filter indicator. T3
activates/deactivates the odour filter indicator. To exit the
menu, hold pressed T1 or wait 10''
Filter reset
The hood signals the need for filter maintenance at regular
intervals:
− grease filter every 40 hours;
− odour filter every 160 hours.
In this case, with the hood off, when the user touches any
button the interface signals two types of needs for a period of
10'':
− if T1+T2 flash: grease filter maintenance;
− if T1+T3 flash: odour filter maintenance.
During the 10'' it is possible to reset the grease filter by
pressing T1+T2 and to reset the odour filter by pressing
T1+T3. After the reset, the button combinations will flash
rapidly twice. The interface will now work as normal.
Please note:
During the 10", the hood will work normally but without any
visual feedback regarding the speed buttons. If during the 10''
no operations are carried out, the LEDs will stop flashing and
the visual feedback will return to normal.
Maintenance
Cleaning
Clean using ONLY a cloth dampened with neutral liquid
detergent. DO
INSTRUMENTS. Do not use abrasive products. DO NOT USE
ALCOHOL!

Grease filter

Fig. 10-11
Traps cooking grease particles.
The grease filter must be cleaned once a month using non
aggressive detergents, either by hand or in the dishwasher,
which must be set to a low temperature and a short cycle.
When washed in a dishwasher, the grease filter may discolor
slightly, but this does not affect its filtering capacity.
To remove the grease filter, pull the spring release handle.

Charcoal filter (filter version only)

Fig. 12
It absorbs unpleasant odors caused by cooking.
The saturation of the charcoal filter occurs after more or less
prolonged use, depending on the type of cooking and the
regularity of cleaning of the grease filter.
In any case it is necessary to replace the cartridge at least
every four months.
The charcoal filter may NOT be washed or regenerated.
Circular charcoal filter
Apply one on each side as cover to both the shield grids of the
motor impeller, then turn clockwise.
For the disassembly, turn counter-clockwise.

Replacing lamps

The hood is equipped with a lighting system based on LED
technology.
The LEDs guarantee an optimum lighting, a duration up to 10
times longer than the traditional lamps and allow to save 90%
electrical energy.
For replacement, contact the technical service.
22
NOT CLEAN WITH TOOLS OR