Parts List; Product Set Up; Installation Concerns; Product Use - Nuna AACE LX Bedienungsanleitung

Parts List

Make sure all parts are available before assembly. If any part is
missing, please contact local retailer. No tools are required for
assembly.
1
Head Support
2 Lower Back Support
3 Armrest
4 Seat Depth Adjustment
button
5 Base
6 Side Impact Protection Pod
1
2
3
4
5
10
11
7 AACE lx instruction
7
Cupholder
8 ISOFIX Guides
9 Head Support Adjustment
Lever
10 ISOFIX Adjuster Button
11 Instruction Manual Storage
Compartment
12 ISOFIX Connector
6
7
8
12

Product Set Up

Installation concerns

DO NOT install this enhanced child restraint on vehicle seats
with Lap Belts only. (1)
This enhanced child restraint is suitable for vehicle seats with
a 3-point Retractor Safety Belt. (2) If your vehicle has ISOFIX
Anchor Bars, we strongly recommend that you connect the
ISOFIX connector to the ISOFIX Anchor Bars together. (3)
DO NOT install this enhanced child restraint on vehicle seats
that face sideways or rearward with respect to the moving
direction of the vehicle.
Please refer to your vehicle owner's manual for recommended
or suggested installation positions. (4)-1
This enhanced child restraint must be installed in the rear
vehicle seat. (5)
DO NOT install this on movable vehicle seats during installation.

Product Use

Use Side Impact Protection
1
- The enhanced child restraint is delivered with removable side
impact protection. This side impact protection pod MUST be
used on the door side of the vehicle. Installation shown in (6)(7).
2
- Press the release button to remove side impact protection. (8)
9 Cupholder Assembly
Insert the Cupholder clip into the opening on either side of seat. (9)
Make sure the Cupholder clip is fully inserted into the plastic slot on
booster. (10)
AACE lx instruction 8