Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disassembly of the protective cap
for the eyepiece
the protective cap for the
eyepiece is attached to
the eyepiece with a cord.
By loosening the screw on
the eyepiece with a screw-
driver, you can remove the
cord with the cap from the eyepiece. Please
reinsert the screw.
after using the observation telescope
• Please put the protective cap for the objective
lens back on.
• In order to protect the cover glass in the bayonet
fitting, leave the eyepiece mounted and protect
it by putting on its protective cap or close the
bayonet fitting with the cover provided for this
purpose.
maintenance and care
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres.
it is suitable for objective lens, ocular lens and
eye-glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. if the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens sur-
faces!
DE
EN
All manuals and user guides at all-guides.com
18
cleaning
we have designed all elements and surfaces
to require little care. to ensure the long-lasting
optical brilliance of your telescope, you should
keep the glass surfaces free of dirt, oil and grea-
se. when cleaning the lenses, first remove larger
particles with an optical lens brush. For the subse-
quent thorough cleaning we recommend breathing
onto the lens surface to form a coat of conden-
sation and then cleaning it with a soft, moist cloth.
the housing is best cleansed with a soft, moist
cloth (don't use the lens-cleaning cloth).
in the
event of hard-to-remove dirt (e.g. sand) the eye
cups can be unscrewed and cleaned very easily.
Storage
You should keep your telescope in a well-ventila-
ted and dark place.
if the instrument is wet, it
must be dried prior to
storage.
EN
DE
19
Werbung
