Philips Pixel Plus 32PW9788 Bedienungsanleitung Seite 31

Connect audio receiver
Although your TV is already equipped with a Digital MultiChannel decoder you might want to connect
your own MultiChannel surround receiver.
MultiChannel surround receiver with or without digital input connectors
AUDIO
AUDIO
OUT OUT
CENTRE IN CENTRE IN CENTRE IN
DIGITAL
AUDIO
OUT
To select connected equipment
Press the v key on the remote control repeatedly to select
according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link Surround receiver
See the separate supplied Cinema Link instruction manual
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+ RW) or DVD can be
operated with the remote control via the Recorder
or DVD menu on screen.
Recorder
Ò p
Rwd Play Stop Play
DVD
Ò p ‡
Prev. Play Stop Play
All manuals and user guides at all-guides.com
& Connect a MultiChannel surround receiver to the
and connectors at the back of your TV.
R L
é
If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the MultiChannel
surround receiver
CENTRE IN
"
Select
Centre input On
loudspeakers of the TV will now only produce centre sound.
'
If necessary, adjust the volume level of the centre sound in the
Centre in volume
volume has to be controlled via the MultiChannel surround
receiver.
(
In case of a Digital MultiChannel surround receiver, also connect
the receiver to the
In this case the loudspeakers of your TV can not act as centre
speaker. Select
see the instructions manual of your Digital MultiChannel surround
receiver.
‡ π † ®
Ï
Ffw Rec Eject
π †
Ï
Next Eject
connector and to the
CENTRE OUT
connector at the back of your TV.
in the Source menu; See p. 11.The
menu item of the Source menu.The overall
DIGITAL AUDIO OUT
Centre input Off in the Source menu, see p. 11. Also
, ,
EXT1 EXT2 EXT3
&
Press the key on the remote control.
MENU
é Select the or
Recorder
cursor up/down.
" Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key ® for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the B key for 3 seconds,
both TV and the recorder are switched to standby.
AUDIO OUT
CENTRE IN
connector.
, or
EXT4 SIDE
menu with the
DVD
29