Aux In; Podcasts; Configuration - Audizio Rimini Bedienungsanleitung

My Playlist
You can make your own playlist from the UPnP music files. Choose and highlight the song you want to add to playlist, press
and hold the [Dial/Select] knob, unit the sign appears. The song will be added to My playlist.
Clear My Playlist
Remove all songs in My playlist to allow a new playlist to be prepared.
Note: If you have DLNA compatible servers available, follow the steps described above to browse the audio files from DLNA
compatible device on the radio to play.

AUX IN

You can enjoy the music from other audio devices by connecting the audio cable to the AUX IN connector at the rear of the
unit, such as mobile phone, MP3 player, etc.

PODCASTS

Radio can play thousands of podcasts from around the world through a broadband internet connection. When you select
Podcast mode, radio contacts the solution provider portal to get a list of available podcasts. Once you select a podcast, radio
connects directly to that podcst source. To enter Podcast mode, either press mode and rotate the knob to cycle through the
listening modes until Podcasts is displayed, or select Mode > Podcasts. The common local controls for sound volume, mute,
play/pause and Presets are available.
Note: The podcast menu is provided from the Podcast portal, so it is only accessible when radio is connected to the Internet.
Podcast lists and submenus will change from time to time.
•
My Favorite
• Country/Location
•
Genre
• History

CONFIGURATION

Time Display
You can choose the time display at Analog or Digital.
Network
Wireless Network Configuration
Press the <Dial/Select> knob (or Select button on remote) to scan the available wireless network.
Wireless Network (WPS PB)
The WPS allows to connect the radio with your router by pressing one key on the radio and a WPS key on your router for wifi
connection, provided that your router has the WPS function.
Manual Configuration
You can set the DHCP on or off, and enter the SSID name, or delete the connected SSID.
Check network when power on
This is set to enable or disable <Check network when power on>.
Date & Time
The time is set automatically to your local area.
You can choose to manual set the time if you want.
Time Format setting
Time format setting: 12hours / 24hours
Date Format setting
Date format: YYYY/MM/DD, DD/MM/YYYY and MM/DD/YYYY
If manual setup is selected, you will see an added item Daylight Saving Time (DST) setting appeared on the list.
Alarm
Dual alarm clock
There are 2 alarm clocks available and settings as follow:
Scheduling alarm : You can schedule the alarm repeated for every day, particular day in the week or just once.
Alarm sound
Alarm Volume
NAP Alarm
If you would like to take a nap or need an alarm to due in short time, you can use this function. You can select the
time from 5 minutes up to 120 minutes. No Snooze function available for the NAP alarm.
Remark: The NAP Alarm will only release beeping sound.
: Wake to Radio (must be the preset station), Wake to Melody and Wake to Beeping sound.
: Select this option to adjust your desire volume level.
9