RADEMACHER RolloTube S-line Zip DuoFern Serie Original - Betriebs- Und Montageanleitung Seite 54

8.3 Connection of the universal setting cable for manual end point setting
23
(13)
Pin assignment:
The connection is made with the same colours as
the connecting cable of the RolloTube S-line Zip
DuoFern, see figure [ 18 ].
54
1.
Open the terminal contacts by pressing the plung-
ers and connect all of the wires of the motor cable
(10) with the same colours and corresponding to
their functions, see also figure [ 18 ].
Button assignment for the RolloTube S-line Zip DuoFern:
Button 2
Button 1
Button 1 = direction of travel (I / II)
Button 2 = set button (III)
Button 3 = continuous phase (ON/SET)
Button 3
EN