Instructions | English - Memon Memonizerheating & Flatheating Bedienungsanleitung

Instructions | English

The correct memonizerHEATING
size depends on the living space
in the building or the size of the
room which is serviced by the un-
derfloor heating. We recommend
that you only use the memonizer-
HEATING in combination with the
memonizerCOMBI.
See page 6 for installation diagrams
The memonizerHEATING is mounted on the return
pipe of the heating water circuit as standard. The
heating pipe must be exposed for installation. Any
insulation must be removed beforehand. Place the
memonizerHEATING against the heating pipe and
secure the device on the outer sides with the sup-
plied Velcro straps. After securing the memonizer,
put the shielding sleeve over the pipe – the
memonizerHEATING is now fully installed.
In heating systems that are connected to a district
heating network or a central heating system, the
memonizerHEATING is installed in the same way
behind the transfer point on the flow pipe.
If the memonizerHEATING is to be installed for the
heating circuit of an underfloor heating system, it
must be directly attached to the distributor or the
flow pipe for the underfloor heating circuit.
The memonizerFLATHEATING is mounted on the
inlet valve of the heating circuit. Mount the me-
monizer so that the memon logo always faces you.
If you have any questions, please contact our
service department to ensure correct installation.