Numark Mixstream Pro 1284213 Schnellstartanleitung Seite 3

Setup
Items not listed under the
Important: Occasionally, we may update Mixstream Pro's firmware to add exciting new
features and improvements. Visit
documentation updates, especially after you update your software (firmware updates may
address new software features).
1. Visit numark.com
Numark product.)
2. In your account, download and install the latest firmware version of Engine Prime.
Double-click the .exe (Windows) or .dmg (macOS) installer file you downloaded, and then
follow the on-screen instructions to install Engine Prime.
3. Transfer your music to a media device to be used with Mixstream Pro.
4. Connect input sources (microphones, CD players, etc.) to Mixstream Pro.
5. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to Mixstream
Pro.
6. Plug all devices into power sources, and turn on devices in proper order:
•
When starting a session, turn on (1) input sources, (2) Mixstream Pro, (3) output
devices.
•
When ending a session, turn off (1) output devices, (2) Mixstream Pro, (3) input
sources.
7. To use Engine OS (standalone playback): Insert a USB flash drive or SD card (with an
Engine-configured music library) to Mixstream Pro's USB port or SD Card Slot.
Headphones
Introduction > Box Contents
numark.com
and log into your account. (Create an account if this is your first
Powered
Loudspeakers
are sold separately.
to check for available firmware and
Microphone
USB Hard Drive
Power
3