Type Plate; Product Liability - Husqvarna K 7000 Bedienungsanweisung

Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 8 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the product. Refer to
17 .
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
This product complies with applicable EU
Directives.
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling location
for electrical and electronic equipment.
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Cutting equipment decal
1
5
4
Personal protective
Kickback on page
3
4
5
2
1. Cutting blade diameter
2. Max. speed of output shaft
3. Max. blade thickness
4. Direction of rotation
5. Bushing dimension

Type plate

Husqvarna K7000
HID 970449601 4NE
2019 472000402
Husqvarna AB
561 82 Huskvarna SWEDEN
5500W 4300rpm 016" /400mm
Made in Sweden
Row 1: Brand, Model
Row 2: Product id
Row 3: Manufacturing year, Serial No
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6: Output power, Cutting blade rpm, Blade capacity
Row 7: Country of origin

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
1635 - 003 - 20.08.2021