Inhaltsverzeichnis; Product Description; Intended Use; Introduction - Husqvarna K 7000 Bedienungsanweisung

Introduction..................................................................... 2
Safety..............................................................................5
Assembly...................................................................... 12
Operation...................................................................... 17

Product description

These HUSQVARNA K 7000 and K 7000 SmartGuard
are electric portable handheld cut-off machines. To
operate the product, connect the product to the
necessary power pack.

Intended use

The product is used to cut hard materials as concrete,
masonry, stone and steel. Do not use the product for
Product overview K 7000
1. Rear handle
2. Switch for water supply
3. Blade guard
4. Adjustment handle for the blade guard
5. Cutting blade (not supplied)
6. Cutting equipment decal
7. Front handle
2
Contents
Maintenance................................................................. 25
Transportation, storage and disposal........................... 27
Technical data.............................................................. 28
Declaration of Conformity............................................. 30

Introduction

other tasks. The product must only be used by
professional operators with experience.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note:
National/Local regulations could restrict the use
of this product.
8. Display
9. Water flow adjustment valve
10. Power trigger lockout
11. Power trigger
12. Information and warning decal
13. Flange, spindle and arbor bushing
14. Belt tensioner
1635 - 003 - 20.08.2021