Vankyo Performance V630W Benutzerhandbuch Seite 14

* Continuously tap on Built number for several times until it shows Developer mode had
been turned on.
* Get back to the settings of your mobile device, it will show Developer options.
3) Connect your Android mobile device to the USB port of the projector with the
ORIGINAL USB cable.
4) Tap OK when your Android mobile device pops out the window of Allow USB
debugging?, then your Android device will be projected to the wall/screen.
1) The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data,
otherwise screen mirroring may fail. You can plug the cable into your laptop to check the
availability of transferring the data.
2) Some mobile devices may not support screen mirroring due to the compatibility.
3) Some Android mobile devices may only transfer the display without audio due to the
protocol restrictions.
Projection distance & size
The recommended projection screen is around 90 inches with a projection distance of
around 9.84ft.
Ambient darkness will improve the clarity of the projected images.
14