Toshiba Thunderbolt 3 Dock Bedienungsanleitung Seite 14

Toshiba Thunderbolt™ 3 Dock
Component
Universal Serial Bus
(USB 3.0) ports
LAN jack
(10/100/1000
BASE-TX Ethernet)
The Local Area Connection icon in the System Tray/Notification Area
■
NOTE
does not show a connection. Open "Network Connections" to view the
Ethernet Connection.
Component
Thunderbolt™ 3/
USB Type-C™ port
HDMI™ output port
DisplayPort™
EN-14
Description
Three Universal Serial Bus ports, which comply to
the USB 3.0 standard, are provided on the back
panel of the dock.
These three ports connect the selected
USB peripherals.
The USB 3.0 port is compliant with USB 3.0
standard and backward compatible with USB 2.0
devices.
This jack lets you connect to a LAN via a network
cable (not provided). Connect one end of a network
cable to the Ethernet port (RJ-45) on the dock and
the other end to your network for high performance
network access. To configure the network
properties of the Ethernet adaptor:
Select Start -> Windows System -> Control
Panel -> Network and Internet -> View network
status and tasks -> Change adapter settings.
In the Network Connections folder, double-click the
connection icon for the Ethernet adaptor of the
dock, which is indicated by dock Ethernet.
This opens the Local Area Connection Properties
window for you to configure the network settings as
required according to your network environment.
If you are unsure about the settings, consult your
network administrator for assistance.
Description
One Thunderbolt™ 3/USB Type-C™ port, which
supports Thunderbolt™ 3 and USB 3.1 Gen2,
is provided on the back of the dock.
HDMI™ output port can connect with Type A
connector HDMI™ cable (supports video and up to
5.1 surround sound).
This port is for a connection to a DisplayPort™
device.
User's Manual