Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
body in a dry state and prevent it from mildewing.
3:Turn off the machine, unplug the power plug, and wrap the power cord
around the wrapping post; install the water plug and the drainage cover.
4:Remove the exhaust pipe and keep it properly.
5:Cover the air conditioning with a plastic bag. Put the air conditioning in a dry
place, keep it out of the reach of children, and take dust control measures.
6:Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine
components properly.
IX.Troubleshooting
Do not repair or disassemble the air conditioning by yourself. Unqualified
repair will lead to failure of the warranty card, and may cause damage to
users or their properties
Problems
The air conditioning
does not work.
.
Reasons
There is no electricity.
The water-full indicator will
flash.
The ambient temperature is
too low or too high
In cooling mode, the room
temperature is lower than
the set temperature; in
heating mode, the room
temperature is higher than
the set temperature.
In dehumidification mode,
the ambient temperature is
low.
Solutions
Turn it on after connecting
it to a socket with
electricity.
Discharge the water
inside.
Recommend to use the
machine in at the
temperature of 7-35 ℃
(44-95 ℉).
Change the set
temperature.
The machine is placed in
a room with an ambient
temperature of greater
than 17 ℃ (62 ℉).
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
