Camry Premium CR 2323 Bedienungsanweisung Seite 4

15. Do not allow the device to wet. If the device falls into water, immediately remove the
power plug from the power socket. If the device is powered, do not put hands in the water.
Have the device checked by the qualified electrician before using it again.
16. Do not touch the device with wet hands.
17. The device has to be turned off after every use.
18. Do not leave device unattended when plugged in.
19. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
20. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
21. Do not wrap electric cable around the device.
22. Do not use the appliance in the bath.
23. Do not remove dust or foreign bodies from the inside of the device using sharp objects.
24. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
25. Do not cover the appliance, it might cause the accumulation of heat in its interior and it
may cause damage or fire.
26. Hairsprays contain flammable materials. Do not apply them while using the device.
27. Do not use the device on people who are sleeping.
28. During operation, do not put the device on a wet surface or on a surface that is sensitive
to heat and high temperatures.
29. After use, turn off and unplug the unit. Wait until the device cools down before storing.
30. The heating elements reach high temperatures during operation. Do not touch hot parts
of the device with bare hands and do not allow it to come into contact with the scalp, as this
may cause burns.
31. The device is not intended to be operated with external timers or a separate remote
control system.
DESCRIPTION OF THE DEVICE
1. Power button/ temperature control
3. Handle
5. Swivel power cord
USING THE DEVICE
To achieve the best results in hair crimping, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use the
correct temperature setting for your hair type.
1. Before starting the electrical wire should be fully unrolled.
2. Insert the plug into the power socket.
3. Press the power button (1) until the device turns on and LED control light (2) will switch on.
4. Adjust the temperature using the temperature control button (1). During heat up the LED control light will stay red. When the appliance
reaches the desired temperature, LED control light will change to green.
5. Starting from the top of the head choose a small strand of hair and straighten it and comb.
6. Then put it between the plates (4) and clamp. Hold down for 3 seconds, and then release the clamp.
7. Continue crimping down the length of your hair until the entire hair band is crimped.
NOTE: The device is hot during operation. Do not touch the plates to the scalp or hands.
8. Repeat with the next strand until all the hair bands are crimped.
9. After finishing work, turn off the hair crimper. Press power button twice (1) to disable temperature lock and then press and hold for about
3 seconds until the LED control light turns off. Then unplug the power cord from the outlet.
2. Control lights: 130ºC - 150ºC - 170ºC - 190ºC - 210ºC
4. Ceramic coated crimping plates
6. Hook for hanging
4