Settings - fors GVI6157 Benutzerinformation

8
1)
Programme
P3
70° Pro
P5
45° Gläser
P4
30 Minuten
P7
Vorspülen
P6
Extra SILENT
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according
to the water hardness.
• The activation or the deactivation of the
acoustic signal for end of programme.
• The selection of the colour for
TimeBeam.
• The activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• The activation or the deactivation of
AirDry.
These settings will be saved until you
change them again.
All manuals and user guides at all-guides.com
Water
(l)
12.5-14.5
12 - 14
10
4
9 - 10
Write down the product number (PNC) that
is on the rating plate.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1.
When you activate the appliance, usually it
is in programme selection mode. However,
if this does not happen, you can set the
programme selection mode in the following
way:
Press and hold simultaneously
until the appliance is in programme
selection mode.
The water softener
The water softener removes minerals from
the water supply, which would have a
detrimental effect on the washing results
and on the appliance.
Energy
(kWh)
1.4-1.7
0.7 - 0.9
0.9
0.1
1.1 - 1.3
Duration
(min)
170-190
82-92
30
14
230 - 250
and