Design And Function - Vigor V 1436 Betriebsanleitung

GB

Design and Function

1. Technical Data / Components of the Tool
1 Carrying capacity in tons
2 Minimum height
3 Maximum height
4 Framework length
5 Framework height
6 Lever length
7 Width
8 Rubber washer x
9 Caster, front x
10 Caster, behind x
11 Weight net
12 Weight gross
2. Operation
Lifting the weight:
• Mount the lever and tighten it.
• Secure the vehicle with the chocks to make sure that the vehicle will not process. Use the lever
in order to bring the lifter into the required position.
• Close the valve by turning it clockwise as far as it will go.
• Use the lever to pump up the weight to the requested height.
Lowering the weight:
• Lift the weight in order to remove carefully the pillar.
• Fit the lever on the valve and then turn slowly the lever anti-clockwise until the weight has
dropped. Make sure that the valve opens slowly to avoid that the weight gets lowered jerkily.
If the weight cannot be lowered, use a different lever to lower the weight safely and have the
lever lateron checked by skilled personnel.
• After lowering slowly the weight, close the valve by turning it clockwise.
• Keep these instructions. Read and follow the information given herein for your own safety. The
owner and user should always have the most recent information on the lifter in order to follow
the instructions for a safe use of this product. The instructions and the safety advice must be
available in the mother tongue of the user prior to using the tool. Make sure that the user knows
about the risks which may occur while using this product.
• If you are not sure that the user knows the necessary safety tips, the safety tips and the operat-
ing instructions regarding this product must be provided to the user in his mother tongue.
• This lifter is neither intended for lifting campers and caravans nor for transportation and other
applications in general. This lifter is only intended to lifting one side or the rear end of a passen-
ger car.
• Never go beyond the maximum load. Only use the device on solid and plain ground. Only use
this device for lifting.
• After lifting the load, secure immediately with pillars.
• Never process the lifter when it is carrying weight.
• Only use the lifter for passenger cars as indicated by the manufacturer.
• Changes on this tool are not permitted.
• Do not use components and spare parts of other manufacturers.
10
All manuals and user guides at all-guides.com
t
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg
kg
USA
2.25
150
520
709
70
640
249
70
76
50
17.8
20