For Your Safety - Vigor V 1436 Betriebsanleitung

GB

For Your Safety

This paragraph gives an overview of important security advice to help to ensure the optimal
protection of the personnel as well as the safe and trouble-free operation of the tool.
Furthermore, all stickers and labels on the tool must be observed and must be kept legible.
1. General Aspects
• This tool was developed and manufactured according to the technical norms and standards
valid at the time and is considered to be operationally reliable. Nevertheless, the tool can
present a danger when it is not used as intended or in an inappropriate way by non-qualified
personnel. Please make sure that any person using this tool or carrying out maintenance work
carefully reads these operating instructions and fully understands all information given, before
using the tool.
• Any modification of the tool is strictly forbidden.
• All security advices, warning and operation notices on the tool have to be kept legible. Re-
place all damaged labels or stickers.
• All indications concerning setting values and setting ranges must be observed.
• The service jack must only be used on solid and plain ground.
• Use chocks to secure the vehicle.
• Don't work underneath the lifted weight unless it is properly secured .
2. User's / Owner's Liability
• Keep the operating instructions together with the tool at all times.
• The tool must only be used if it is in good working order. If the lifting mechanism reacts jerkily
and/or uneasily, the service jack must be put out of operation and checked.
• All safety equipment, e.g. fire extinguisher etc., must always be within reach and should be
checked regularly.
• In addition to the safety advice given in these operating instructions, the general safety regula-
tions, regulations for the prevention of accidents and regulations for environmental protection
being valid for the application area of this tool have to be observed and respected.
• The tool may only be operated, maintained and repaired by skilled and trained personnel.
3. Appropriate Use
Operational reliability can only be ensured, if the tool is used as intended and in compliance
with the indications given in the operating instructions. In addition to the safety advice given
in these operating instructions, the general safety regulations, regulations for the prevention of
accidents and regulations for environmental protection being valid for the application area of
this tool have to be observed and respected.
• Always ensure tools are used, inspected and maintained in compliance with the respective
local, state, national or federal regulations.
• Service jacks are intended for lifting passenger cars from one side.
• The maximum weight is mentioned in the technical data table
• When the service jack carries weight, it must not be processed or displaced.
• Overloading may cause the failure of the hydraulic system and therefore cause personal injury
or damage to property.
• The improper use of the ViGOR Service Jack or the disregard of the safety advice may cause
severe injury or death.
• Any deviation from the intended use and/or any misapplication of the tool is not allowed and
will be considered as improper use.
• Any claims against the manufacturer and/or its authorized agents because of damage caused
by improper use of the tool will be void.
• Any personal injury or material losses caused by improper use are the sole responsibility of the
operator and user.
8
All manuals and user guides at all-guides.com
USA