Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Design and function
1. Function and description (technical data)
1. Load capacity in tonnes
2. Min. height
3. Max. height
4. Length
5. Width
6. Length of lever
7. Spindle stroke
8. Spindle screw head diameter g
9. Spindle screw height
10. Weight
2. Included in delivery
Hydraulic jack
lever
3. Before starting operation
• Ensure that the use, inspection and maintenance of hydraulic tools always comply with relevant local
and national regulations.
• Oil the tool; see the section on maintenance in these operating instructions.
• Before every use, the jack must be inspected for oil leakages and/or damage and must not be used if
leakages or damage is detected.
Bleeding air from the hydraulic cylinder:
• Pump the jack several times while the valve screw is open to distribute the oil.
• To bleed the cylinder, close the valve, pump the jack until it is completely up, open the oil filling screw,
then open the valve and push the cylinder back.
V 2479
t
2
mm
158
mm
308
mm
94
mm
90
mm
415
mm
107
mm
21
mm
67
kg
2.3
V 2478
6
197
382
114
114
485
144
31
70
4.4
13
Werbung
Inhaltsverzeichnis
