Warranty Conditions; Eu Declaration Of Conformity - Torqeedo Display Gateway Gebrauchsanweisung

If the Torqeedo system data cannot be selected on the display or
is not shown, proceed as follows to troubleshoot:
– Check that the Torqeedo System is switched on.
If it is not, switch the system on and try again.
– Check whether there are other errors in the Torqeedo system.
If there are, remedy them before proceeding.
– Check that the Torqeedo Gateway has been correctly recognised by the display.
Read the display manufacturer's installation instructions.
– Check the LEDs on the Display Gateway.
LED 1 flashes: Check the TorqLink cabling.
LED 2 is permanently inactive: Check the TorqLink cabling.
LED 3 is permanently inactive: Check the NMEA 2000 cabling.
LED 4 is permanently inactive: Check the power supply to the NMEA 2000 network.
All other LED flashing codes do not indicate an error status.
If you cannot rectify faults using the measures mentioned,
contact Torqeedo Service.
5. Disposal
Dispose of the product according to EU Directive 2012/19/EU (WEEE) and national laws.
Do not dispose of the product with household waste.

6. Warranty conditions

Warranty conditions and warranty certificate available at www.torqeedo.com.

7. EU declaration of conformity

The EU declaration of conformity can be downloaded from www.torqeedo.com.
12