Errors Codes - La Sommeliere ECELLAR185 Gebrauchsanweisung

Bottle detected but not installed
Pairing with the cellar does not work
Error code « EE »
Error code « HH »
Error code « LL »
Error code « DD »
Water is flowing from my wine cellar
A red LED flashes continuously
under the master box
One or more LEDs remain on on the
front of my shelves
The buttons on the control panel do
not work
My digital register and my actual
stock are different

Errors codes

Error codes
HH
LL
DD
EE
If any other code, such as A, B, C, D, E, G, I, J, K, M, N, O is displayed on your screen, please
contact customer service.
The cellar is no longer connected to the internet (Wifi).
The sensors on the central bar of the shelf are dirty => provide
cleaning with a soft, dry cloth.
The QR code of the master box was scanned incorrectly.
The QR code is damaged.
Wifi connection is insufficient.
Bluetooth range is exceeded.
The cellar is not connected.
The phone's WiFi or Bluetooth is not activated.
Temperature probe fault.
High temperature alarm, unplug your appliance and call your
after-sales service
Low temperature alarm, unplug your appliance and call your
after-sales service
Appliance in defrost phase => wait for the end of defrost
The drain hole inside your cellar is blocked.
The cellar is not tilted back enough.
The water tank behind the cellar is full.
the cellar is not connected or has lost its connection to the Wifi
network ;
You made a position call (s) (locate a bottle or ESommelier
function) and you did not come to pick up / drop off the bottle (s)
=> wait 5 minutes for it (s) to go out on its own or open and close
the wine cellar door
Check that the control panel is not locked, padlock displayed on
the screen. Unlock by pressing the key with the padlock symbol
for 3 seconds to unlock the control panel
Did you make any modification during a power break?
Check in Vinotag application FAQ how to resolve your stock
discrepancies.
Meaning
High temperature alarm
Low temperature alarm
Device in defrost
Temperature probe fault
74