Omron M4 Intelli IT Bedienungsanleitung Seite 7

Display/Problem
appears
appears
flashes
flashes
flashes
appears
flashes
appears or the
monitor is turned
off unexpectedly
during a
measurement
Nothing appears on the
display of the monitor.
Readings appear too high or
too low.
EN5
All manuals and user guides at all-guides.com
Possible Cause
The monitor has malfunctioned.
The monior cannot connect to a smart
device or transmit data correctly.
The monitor is waiting for pairing with
the smart device.
The monitor is ready to transfer your
readings to the smart device.
More than 48 readings are not
transferred.
The date and time is not set.
There are 60 readings in memory to be
transferred
Batteries are low.
Batteries are depleted.
Battery polarities are not properly
aligned.
Blood pressure varies constantly. Many factors including stress, time of day, and/or how you apply the arm
cuff, may affect your blood pressure. Review section 2 of instruction manual
Solution
Press the [START/STOP] button again. If "Er" still appears, contact
your OMRON retail outlet or distributor.
Follow the instructions shown in the "OMRON connect" app.
If the "Err" symbol still appears after checking the app, contact
your OMRON retail outlet or distributor.
Refer to section 5 of instruction manual
monitor with your smart device, or press [START/STOP] button
to cancel pairing and turn your monitor off.
Open the "OMRON connect" app to transfer your readings.
Pair or transfer your readings to the "OMRON connect" app so
you can keep them in memory in the app, and this error symbol
disappears.
Replacing all 4 batteries with new ones is recommended. Refer
to section 4 of instruction manual
Immediately replace all 4 batteries with new ones. Refer to
section 4 of instruction manual .
Check the battery installation for proper placement. Refer to
section 4 of instruction manual .
for pairing your
.
.