cecotec BIGDRY 3000 PURELIGHT Bedienungsanleitung Seite 22

ENGLISH
Fig. 3
1. Pull and lift to open the filter cover.
Fig. 4
2. Pull out to extract the filter.
Fig. 5
3. Remove the packaging of the new filter.
Fig. 6
4. Insert the new filter into the machine.
Fig. 7
5. Clip the filter cover back into the machine. To do so, align the bottom of the filter cover with
the body of the device and push the cover towards the device.
6. After replacing the filter, turn the appliance on and press and hold the power/purification
button for seven seconds to reset it.
Draining collected water
The water tank has a maximum capacity of 1000 ml with a 750 ml/ per day working capability.
When the water tank is full, the full tank LED indicator will light up.
Switch off and unplug the machine.
Avoid tilting it and carefully remove it, slide the water tank cover open and pour the water out.
Insert the water tank cover and then insert the water tank back into the unit and press the
power/purification button to resume operation.
Do not damage or remove the water tank float as this can affect the operation of the appliance,
cause water leaks and malfunction.
Note: Open the tank's cover according to the picture below, the pour water inside it.
Fig. 8
4. OPERATION
This device combines dehumidification and purification function, providing three operating
modes to enjoy fresh air and a suitable humidity.
1. Full water tank indication
When the water tank is full, the machine will switch off automatically and its indicator light will
turn red and start flashing.
Empty the water tank and place it inside the device again to restart it.
2. Filter replacement
When the device detects that the filter needs replacing, the LED indicator light will turn from
green to orange and continuously flash in orange.
Press the purification button for 7 seconds to reset the device after placing a new filter inside it.
22 BIGDRY 3000 PURELIGHT / PURELIGHT BLACK