Seite 1
Doc. N.° 1SDH001000R0512 - ECN000125163 - Rev. C SACE Emax 2 Ekip COM Modbus RTU, Profibus DP, DeviceNet™ - E1.2-E2.2-E4.2-E6.2 E1.2-E2.2-E4.2-E6.2 ONLY FOR W Ekip Com Modbus RTU Ekip Com Profibus DP Ekip Com DeviceNet™...
Seite 2
Aplicar la placa a los cables COM Ekip E1.2 - E2.2 - E4.2 - E6.2 E1.2 - E2.2 - E4.2 - E6.2 Modulo opzionale aggiuntivo Additional optional module Wahlweises Zusatzmodul Module optionnel supplémentaire Módulo opcional adicional SACE Emax 2 | ABB...
Seite 3
Disconnect power from the Ekip Supply module. Die Speisung von Ekip Supply ausschalten. Debrancher l'alimentation de l’Ekip Supply. Desconectar la alimentación del Ekip Supply. E1.2 F - E2.2 F - E4.2 F - E6.2 F SACE Emax 2 | ABB...
Seite 4
E1.2 F - E2.2 F - E4.2 F - E6.2 F Attaccare alimentazione dell’Ekip Supply Connect power to the Ekip Supply module Die Speisung von Ekip Supply anschließen Brancher l'alimentation de l’Ekip Supply Conectar la alimentación del Ekip Supply SACE Emax 2 | ABB...
Seite 5
E1.2 W - E2.2 W - E4.2 W - E6.2 W E2.2 W - E4.2 W - E6.2 W E1.2 W E1.2 W - E2.2 W - E4.2 W - E6.2 W E1.2 W - E2.2 W - E4.2 W - E6.2 W SACE Emax 2 | ABB...
Seite 6
E1.2 W - E2.2 W - E4.2 W - E6.2 W Attaccare alimentazione dell’Ekip Supply Connect power to the Ekip Supply module Die Speisung von Ekip Supply anschließen Brancher l'alimentation de l’Ekip Supply Conectar la alimentación del Ekip Supply SACE Emax 2 | ABB...
Seite 7
(1), en el Ekip Supply (2) y en el relé (3) - Si el led del Ekip Com (1) parpadea en modo asíncrono respecto al led del relé (3), consultar el manual del interruptor. SACE Emax 2 | ABB...