Set The Display Filter - WEBTEC HPM110 Bedienungsanleitung

4.10

Set the display filter

You can set 7 different filter levels.
1
Press the ZERO/MENU key for 2 s.
2
Press the ZERO/MENU key repeatedly until the desired filter
level is shown at the bottom of the display.
3
Press the RESET/OK/START-STOP key.
Ä The currently selected filter level is saved.
Currently selected filter level
Aktuell gespeicherte Dämpfung
Currently selected filter level
Aktuell ausgewählte Dämpfung
Operation
23