Handling The Device - Philips Lumea SC198 Serie Handbuch

16
English

Handling the device

90º
Note: Your skin may react differently on different
days/occasions for a number of reasons.
1 Before use, clean the light exit window.
2 Put the small plug in the device and put the
adapter in the wall socket.
3 Switch on the device and select the right light
intensity for your skin tone.
4 Place the device at a 90° angle on the skin so
that the integrated safety system is in contact
with your skin.
The integrated safety system prevents
unintentional flashing without skin contact.
5 Press the device firmly onto your skin to
ensure proper skin contact. The device then
automatically performs a skin tone analysis and
the 'ready to flash' light blinks orange slowly to
indicate that you can proceed with the
treatment.
Note: When the 'ready to flash' light starts
blinking orange rapidly, your skin is not
suitable for treatment. In this case, the device
automatically disables. You can try to use the
device on other areas with a lighter skin tone.