Commissioning; Operation - LASERLUCHS PICO-K9-SPOT-V1 Bedienungsanleitung

Commissioning

Insert battery
1. Unscrew the switch unit. Insert the two CR123A batteries as
shown in the illustration above. The negative pole of the batte-
ry has to point to the rotary switch.
2. Screw the switch unit back in.
Note: For changing the batteries a+ and a- symbols are haptically
highlighted on the side of the PICO-K9-SPOT in order to enable an
insertion of the batteries in absolute darkness.

Operation

1. To switch the PICO-K9-SPOT on and off, please turn the rotary
switch either way.
2. You can see the functional status at the mark on the rotary
switch. The exact operation of the switch can be found in
chapter 3.
Fig. 3
Batteries
Laser for
training mode
Laser for
operation mode
Safety rotary switch
23