Safety Rotary Switch - LASERLUCHS PICO-K9-SPOT-V1 Bedienungsanleitung

Operation safety rotary switch
The safety rotary switch on the backside of the PICO-K9-SPOT has
5 settings as well as a button. You can take every single function
from the list below:

Safety rotary switch

Position Operation Mode
Training mode – Laser has continious beam
2–
=˃ Is released by pressing the button once.
Training mode – Laser flashes with 8 Hertz
2··
=˃ Is released by pressing the button once.
OFF
Laser is off
Operation mode – Laser flashes with 8 Hertz
3B··
=˃ Is released by unlocking the safety rotary switch and
triggered by pressing the button.
Operation mode – Laser has continious beam
3B–
=˃ Is released by unlocking the safety rotary switch and
triggered by pressing the button.
Note: Laser is only ON in the selected operating mode by pressing
the button once. Pressing the button again turns the laser off.
Button
Position
not pressed
pressed once
Operation Mode
Laser is off
Laser emits radiation according to the selected
operating mode
Output Laser
power class
1mW 2
1mW 2
70mW 3B
70mW 3B
21