Dantherm HCH 5 Bedienungsanleitung Seite 23

Overview
Introduction This is the user's guide for the home ventilation unit HCH 5 and HCH 8 from Dantherm
Air Handling. The table of contents below lists the sections in this guide.
Serial number For any future inquiries regarding e.g. spare parts we kindly ask you to make a note of
the serial number of the unit here: ______________________
This instruction covers units with serial numbers equal to or higher than:
Warning The power must not be connected until the ducting system has been mounted.
The ventilation unit should not be used to dry newly built houses during construction or
immediately after construction.
The ducts must be covered and the units must not be connected until the house is
ready for occupation, which means that the house is clean and dry. This is to prevent
any construction dust and condensed water from depositing in the ducting system and
to prevent any sanitation inconveniences from the ventilation units later on.
Should this not be respected the warranty of the unit will be annulled and any kind of
maintenance will be done at the customers own expense.
Important Follow the instructions in this guide before you start op and use the unit!
Table of content
This guide covers the following sections
General information
Product description
Functional description
Description of the control panel
User's guide
Preventive maintenance
Accessories
Fault finding guide
Index
Introduction
xxxxxx1128910
Topic See page
24
25
27
30
32
35
37
40
43
23