Stahl ispac 9172 11-00 Serie Betriebsanleitung Seite 16

Operating Instructions
9.3.3 Mounting / Dismounting on pac-Carrier
Mounting

Dismount the black and the green terminal. (see chapter
9.3.4)

Single channel device: Dismount the cover of terminal slot 2.
(between black and green terminal)

Put the device on the pac-Carrier and swivel the device until
the red locking handle is locked.

Please check that the locking handle is locked.
Dismounting
Put the screw driver into the red locking handle (1) and move

the screw driver into the described direction.
Device will be moved out of the slot (2).

9.3.4 Mounting / Dismounting detachable terminals
All devices are equipped with detachable terminals.
Dismounting

Place the screw driver between terminal and
enclosure.

Move the screw driver as described.
Mounting
Place the terminal into the terminal slot and press it towards the device until it is locked.
16
I.S. Relay Module Type 9172
english