Specification; Troubleshooting - Streetz CM753 Benutzerhandbuch

AUDIO CABLE CONNECTION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and
your device.
The speaker is now connected to your device.
HANDS-FREE FUNCTIONALITY
A ringtone will be played when there is an incoming call
on the connected device.
A short press on the MF button to answer.
When hands-free is activated, you talk via the speaker's
microphone.
TRUE WIRELESS FUNCTION
This speaker has TWS (True Wireless Sound)
functionality. This means that two speakers can pair
with each other and function as a 2.0 wireless speaker
system.
In order to use true wireless function, you must have
2 pieces of the same speaker.
These can be paired together:
CM750/CM751/CM752.
These can be paired together:
CM753/CM754/CM755.
These can be paired together:
CM756/CM757/CM758.
To connect
1: Turn on both speakers. Make sure that both speakers
are not connected to any device through Bluetooth.
2: Press and hold the Play/Pause button on one of the
speakers for about 2 seconds until you hear a tone.
3: Release the Play/Pause button. It can take a few
more seconds before the speakers connect to
each other.
4: Use the Bluetooth menu on your device and pair the
speakers with your phone by selecting the speaker
(it will only display one speaker, both speakers bow
function as one).
Note: You can control Play/Pause, Volume and Next/
Previous track on both of the speakers.
The speakers will automatically pair with each other if
they were paired when they were shut off.
If the automatic pairing doesn't work when they are
turned on. Please connect manually, see point 1-4.
If your device is connected to both speakers without
the speakers being paired with each other; To pair the
speakers with each other you have to disconnect your
device from one of the speakers.
To disconnect
1. Press and hold the Play/Pause button on one of the
speakers for about 2 seconds until you hear a tone.

SPECIFICATION

Power input: 5V DC, 1 A
Built-in rechargeable battery: Li-on, 3.7V
Speaker impedance: 4Ω
Bluetooth: 4.2+EDR
Range: Up to 10m
IPX5

TROUBLESHOOTING

The speaker does not turn on or does not respond?
Recharge your speaker.
Restart the speaker.
There is no sound?
Adjust the volume.
Make sure that your Bluetooth device is within range.
Ensure there is no obstacles in the way that can block/
disturb the signal.
Check via the device's Bluetooth connection if the
speaker is connected with the device.
There is poor sound quality?
Move the device closer to the speaker or try removing
obstacles between them.
Cannot connect the device with the speaker?
Disconnect other connected devices and then try again.
You can force a disconnection by moving out of
Bluetooth range (10 m).
3