Xiaomi Mi P 26199 Bedienungsanleitung Seite 11

Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your
device, and interact it and other smart home devices with Mi
Home/Xiaomi Home app.
Scan the QR code to download and install
the app. You will be directed to the
connection setup page if the app is installed
already. Or search "Mi Home/Xiaomi Home"
in the app Store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia).
The name of the app displayed on your device should be taken as the default.
Note:
The version of the app might have been updated, please follow the instructions
based on the current app version.
Rese ing Wi-Fi
When switching to a new router or changing your Wi-Fi password, you
will need to reset the vacuum-mop's Wi-Fi connection. Turn on the
vacuum-mop, then simultaneously press and hold the bu ons
for 3 seconds until you hear a voice saying "Waiting for the network
configuration". Once the Wi-Fi connection is successfully reset, you can
reconnect the vacuum-mop.
Note: Only 2.4 GHz Wi-Fi networks are supported.
Restoring Factory Se ings
Press and hold the bu on for 5 seconds. When you hear a voice
saying "Factory se ings will be restored", press and hold the bu on
again for 5 seconds until it says "Restoring factory se ings". When the
se ings are successfully restored, all user data will be cleared, and you
will hear a voice saying "Factory se ings restored successfully".
and
09