that the frequency and voltage shown on the rating
plate correspond with the mains voltage.
The machine is designed for continuous heavy work.
Depending on the number of running hours – the
dust filter should be renewed. Keep the machine
clean with a dry cloth, and a small amount of spray
polish.
During maintenance and cleaning, handle the ma-
chine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
•
Use filtered compulsory ventilation
•
Wear protective clothing
•
Clean the maintenance area so that no harmful
substances get into the surroundings.
During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
•
Packed in well sealed bags
•
Disposed of in a manner that complies with valid
regulations for such waste removal.
For details of after sales service contact your
dealer or conel service representative responsible
for your country.
6
Further information
6.1
EU Declaration of conformity
CONEL GMBH
Margot-Kalinke-Straße 9
80939 München
Germany
Hereby declare, that the
Product VAC - Commercial - Wet/Dry
Description 220-240V, 50/60Hz, IPX4
Type CONEL CLEAN M30
Are in compliance with the following standards:
EN 60335-1:2012+A11:2014
EN 60335-2-69:2012
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Following the provisions of:
2006/42/EC
2014/30/EU
München 02-18-2021
Uwe Dietz
CEO CONEL GMBH
OEL=Occupational Exposure Limit,
1)
Original instruction
Optional accessories / Option depending on model
*)
21