Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2
Hazardous dust
WARNING
Hazardous materials.
Vacuuming up hazardous
materials can lead to seri-
ous or even fatal injuries.
The following materials
must not be picked up by
the machine:
• hot materials (burning
cigarettes, hot ash, etc.)
• flammable, explosive,
aggressive liquids (e.g.
petrol, solvents, acids,
alkalis, etc.)
• flammable, explosive
dust (e.g. magnesium or
aluminium dust, etc.)
2.3
Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
Only use original spare parts and accessories from
conel. Spare parts that can affect health and safety
of the operator and or function of the appliance, are
specified below:
Description
M
Flat filter PTFE, 1 pcs.
Fleece filter bag, 5 pcs.
2.4
In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
3
Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
18
OEL=Occupational Exposure Limit,
1)
•
3.1
Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0). Check that suitable filters are installed
in the machine.Then connect the suction hose into
the suction inlet at the machine by pushing the hose
forward until it fits firmly in place at the inlet. Then
connect the tubes with the hose handle, twist the
tubes in order to ensure that they are properly fitted.
Attach suitable nozzle to the tube. Choose nozzle
depending on what type of material that is to be
picked-up. If used for dust extraction in connection
with dust producing tool then connect end of suc-
tion hose with appropriate adapter. Check that hose
diameter setting corraspondes to actual hose dia-
meter. Connect the plug into a proper electrical out-
let. Put the electrical switch into position I in order to
start the motor.
The hose diameter and the setting for suction hose
diameter must be the same.
Order No.
CTOOLM30FF
CTOOLM30VF
3.2
Auto-On/Off socket outlet for power tools
Appliance socket.
The appliance socket is designed for electri-
cal auxiliary equipment; see technical data for
reference.
•
•
Optional accessories / Option depending on model
*)
Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
Turn I: Activate the machine
Turn
: Stop the machine.
Permanent power on socket.
Turn
: Activate Auto-On/Off
operation.
Turn I+
Off: Activate the
machine with deactivated auto-
matic filter cleaning function
Turn
+
Off: Activate Auto-
On/Off operation with deactivated
automatic filter cleaning function.
Speed control operation on separate
turning knob
ø21
ø21
ø27
ø27
ø32
ø32
ø36
ø36
ø38-40
ø38-40
CAUTION
Prior to plugging in an appliance, always
switch off the machine and the appliance
that is to be connected.
Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
Original instruction
Werbung
Kapitel
Inhaltsverzeichnis
