About Fixing The Outdoor Unit; To Fix The Outdoor Unit; About Installing The Slats Frame; To Install The Slats Frame - Daikin EKLN140A1 Installationsanleitung

4.4

About fixing the outdoor unit

4.4.1

To fix the outdoor unit

1 Fix the outdoor unit with the M8 sheet metal washer (accessory
J), M8 spring washer (accessory H), and M8 nut (accessory I).
c
b
a
a Sheet metal washer M8 (accessory J)
b Spring washer M8 (accessory H)
c Nut M8 (accessory I)
2 Connect the pipes and cables from the outdoor unit according
to the installation manual for the outdoor unit.
4.5

About installing the slats frame

4.5.1

To install the slats frame

1 Position the vertical supports left (a) and right (b) on the base
frame.
a
2 Fix with M5 Torx screws (accessory A) and washers (accessory
B).
INFORMATION
Tighten them hand-tight (tightening torque <5N∙m).
3 Fit the plastic guide pins (accessory M) to the bottom of the
vertical support.
EKLN140A1
Low sound enclosure
4P650154-1A – 2021.04
b
a
b
4 Fix with M5 Torx screws (accessory A) and washers (accessory
B).
INFORMATION
Tighten them hand-tight (tightening torque <5N∙m).
5 Slide the 15×2.5 plastic spacer bush (accessory N) over the
lower guide pins.
4.6

About installing the slats

c
b
a Lower slats (2×)
b Intermediate slats (8×)
c Upper slats (2×)
4.6.1

To install the lower slats

1 Tilt the mounting lips at the end of the slat so that they form a
90° angle with the slat.
4 Unit installation
a
Installation manual
7