Overmax Multipic 4.1 Bedienungsanleitung Seite 21

a.
USB input – for example pendrive, hard drives.
b.
HDMI input – for example PC, laptop, console, satellite receiver, phone
(supporting MHL technology and only through the dedicated MHL cable).
c.
Video-In (AV) input – for example console, satellite receiver.
d.
VGA input – for example PC, laptop, satellite receiver.
How to set source of video (see: fig. 8)
If more than one video signal is connected to the projector, please specify the
device from which the projector is to broadcast the image.
a.
Use direction keys on the remote control to select (Source) (3) and confirm
with (OK) key on the remote control.
b.
You will see a list of video sources to be selected (as described in a previous point).
c.
Use direction keys on the remote control to select the source from which
the image must be broadcast and confirm with (OK) key.
To return to video source list, select (MENU) on the remote control.
In the video source selection section, you can also set parameters for image
and sound:
Image: image mode, brightness, color, contrast, sharpness.
Sound: sound mode, bass, treble, balance, equalizer.
How to connect to Wi-Fi network (see: fig. 9)
a.
Use direction keys on the remote control to select (Settings) and confirm
with (OK) key on the remote control.
b.
Select (Network) and confirm your choice.
c.
Select (Wi-Fi) and confirm your choice.
d.
Select (Scan) and confirm your choice. The projector will scan available Wi-Fi
networks and show a list of options.
e.
Select the name of Wi-Fi network which you wish to connect to and confirm
with (OK) key on the remote control.
f.
If the network is secured with password, you will be requested to enter it.
Enter the field (Password) and confirm your choice.
g.
The screen will show a virtual keyboard which you can use to enter the password.
To navigate in the keyboard, use direction keys on the remote control, and
confirm selection of letters and numbers with (OK) key. Upper case letters
can be activated by selecting and choosing (ABC). After you have entered
the correct password, press the exit key (12) on the remote control to close
the keyboard. Confirm the password by selecting (Accept/Confirm) key
and press (OK).
h.
To return to main menu, double-click the exit key (12)
EN