Technical Data - Emerson AVENTICS NL1 Serie Betriebsanleitung

9.2.2 Turning the reservoir with bayonet catch
1. Release reservoir.
2. Rotate reservoir 180° and click it back into place.
The release is now pointing to the front.
10 Troubleshooting
Malfunction Possible cause
Contamination display al- Flow rate too high
ready indicates red on first-
time commissioning.
Contamination display indi- Soiled filter
cates red during operation.
Pressure/flow level is not Soiled filter
reached or drops off slowly.
Selected filter is too small

11 Technical data

Maximum permissible pressure, temperature range, and thread connection are
indicated on the products.
The mounting orientation is vertical.
General data
Min./max. medium/ambient temperature
Further technical data can be found in our online catalog.
12 Appendix
Figures: View varies according to the series.
Fig. 1: Semi-automatic condensate
drain
b
Fig. 3: Draining condensate manually
AVENTICS™ NL1 | NL2 | NL4 | NL6 | R412015556-BAL-001-AE | English
Remedy
Use larger series
Reduce flow
Clean or replace filter
Clean or replace filter
Select larger filter
-10 °C /+60 °C
Fig. 2: Fully automatic condensate drain
a
Fig. 4: Exchanging the protective guard and reservoir | Series NL2, NL4, NL6
Fig. 5: Exchanging the protective guard and reservoir | Series NL1, NL2, NL4, NL6
a
b
c
d
Fig. 6: Exchanging the filters | Series
NL1
a
b
c
Fig. 7: Exchanging the filters | Series
NL2 NL4
13