Klarstein BOTELLA 120D Bedienungsanleitung Seite 25

Double Display Board
1. Energy Saving Mode: Press the button 3 seconds to enter (4) (digital countdown
display 3, 2, 1. Press the button for 0.9 seconds after the window just POP
countdown numbers). Press the button (6) and (7) at the same time to exit saving
mode.
2. ON/OFF the power button: Press the button 3 seconds to power off (5) (digital
countdown dis- plays 3, 2, 1, press the button for 0.9 seconds after the window
just POP countdown numbers). Remark: The other functions will turn off except light
switch when the power turns off. Press again (without delay), the power turns on.
3. Lamp button: Press the button and the lamp turns on, the lamp turns off press again.
4. Window: Display setting temperature, display odd numbers "E1, E3" code,
countdown numbers (3, 2, 1).
5. Window: Display T1 actual temperature, display even numbers "E2, E4" code,
countdown numbers (3, 2, 1).
6. Temperature setting up button: Press one time to increase 1 degree Celsius in the
original setting temperature.
7. Temperature setting down button: Press one time to reduce 1 degree Celsius in the
original setting temperature.
8. C/F display conversion function keys: Set the conversion degrees Celsius /
Fahrenheit display, each press this button, the display window will be into degrees
Celsius or Fahrenheit.
EN
25