Reflexion LEDW22C Bedienungsanleitung Seite 57

Auto Standby
Time Zone
OSD Timer
OPTION
In the Option menu you can adapt and save various general settings to suit your needs.
1. Press the MENU button to open the TV menu.
Use the ▲ ▼ ◄► buttons to select the Option menu item.
2.
3. Press the OK button to enter the Option menu.
4. The following menu items are available in the Option menu:
OSD Language
TT Language
Audio Language
Subtitle Language
Hearing Impaired
PVR File System
Reset
HDMI CEC
Set the time after which the device automatically switches to
standby mode if no operation takes place.
Set the time zone based on the installation location.
Set the time after which the device menu is automatically closed.
Set the menu language.
Select the teletext language.
Set the Preferred Audio Language to be selected automatically.
Set the preferred subtitle language to be selected automatically.
This option is for people with a hearing loss. The subtitle is
activated automatically.
The following settings are available for PVR recording.
Select Disk: Selelect the recording medium.
Check PVR File System: Check whether the connected storage
medium is suitable for the recording.
Format: Prepare the USB storage medium for the recordings.
Please note that all saved files will be deleted when formatting
the USB storage medium.
Time Shift Size: Set the maximum size of the timeshift file.
Free Record Limit: Set the maximum time for a recording.
This menu item resets all the settings made (channel / picture /
sound) to the delivery status. The device is then in the delivery
state.
Set the HDMICEC settings. The option only applies to devices
connected to the HDMI 1 and HDMI 2 ports.
HDMI CEC: Activates the CEC setting.
HDMI ARC: Transmits the audio signal via HDMI 1 to externally
connected devices (e.g. soundbars).
Auto Standby: Switches connected devices off when the TV set is
switched off.
Auto TV On: Switches connected devices on when the TV set is
switched on.
57
EN