Reflexion LEDW22C Bedienungsanleitung Seite 54

ATV Manual Tuning
Programm Edit
Signal Information
CI- Information
5V antenna power
LCN
Software Update
(USB)
PICTURE
In the picture menu you can adjust and save the picture settings according to your needs.
1. Press the MENU button to open the TV menu.
Use the ▲ ▼ ◄► buttons to select the Picture menu item.
2.
Starts a manual analog channel search. The following settings are
available.
Storage to: Select the program number on which the station
should be saved.
Sound System: The following points are available:

BG

I

DK

L
Color System: The following points are available:

Automobile

PAL

SECAM
Current: Select the current station to be changed.
Search: To start the search, select Search and press the ◄ or ►
button.
Fine Tune: Press the ◄► buttons to fine tune the frequency.
Red button: Delete selected station.
Yellow button: Move a selected channel to the desired position.
Blue button: lets you skip the marked station when switching
through.
FAV: Marks the selected station with a heart.

Press the FAV button when the menu is closed to open
the favorites list.
0: Delete the complete channel list.
Shows reception information of the selected station. Only active
if a station has been found.
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
Set the 5V antenna power for external antennas at the
connection "TV2 DVB-C / T2HD)" On or Off.
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the Programm edit menu.
Start the software update.
54
EN