Weekly Timer - Fujitsu UTY-RNK-Serie Bedienungsanleitung

WEEKLY TIMER

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
The timer function is not available depending on the unit.
To set the WEEKLY timer
1
Press the " TIMER MODE / CLOCK ADJUST" button to select the weekly timer.
G Day of the week setting
3
1
Press the "DAY / DAY OFF" button to select the day of the week, and then
press the "TIMER SET" button to confirm the setting.
* When select ALL, all of the days will be selected.
G Time setting (ON / OFF timer)
4
Decrement Increment
ON-1
Press the " " button or "
to proceed to the OFF time setting. Set the OFF time in the same way.
If necessary, set the second weekly timer settings in the same way.
G Time setting (Independent OFF timer)
Switching from ON/OFF timer to independent OFF timer
1
ON-2
Press the " TIMER MODE / CLOCK ADJUST" button to change to the independ-
ent OFF timer setting.
* The time setting process is the same as the ON/OFF timer.
Press the "
timer setting.
5
3 4
Repeat steps and to set
the weekly timer for another
day of the week.
ALL
2
2
1
OFF-1 ON-2
" button to set the ON time in 30-minute increments, then press the "TIMER SET" button
OFF-2
TIMER MODE / CLOCK ADJUST" button to return to the ON/OFF
6
Press the "TIMER SET" but-
ton for 2 seconds or more to
complete the weekly timer
settings.
SU MO TU
(SUN) (MON) (TUE)
OFF-2
The independent timer
will flash on the display.
OFF-2
G To delete the operating time
If the "TIMER DELETE" button is pressed during steps
4
, the operating time for the selected day will be deleted.
If all the days are selected, the operating times for all of the
days will be deleted.
2
Press the "TIMER SET" button for 2
seconds or more.
WE TH FR
(WED) (THU) (FRI)
When the operating time is set, the
mark appears.
ex. The timer is set for AM7:00-PM6:00.
OFF-3
SA
(SAT)
3
or
En-8