Preparation; Operation - Fujitsu UTY-RNK-Serie Bedienungsanleitung

PREPARATION

To set the current day and time
1
Press the " TIMER MODE / CLOCK
ADJUST" button for 2 seconds or
more. The time display on the remote
controller will flash.
Decrement Increment
3
4
SET BACK
Press the "
the 12- and 24-hour time displays.

OPERATION

Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
Preset values are displayed when the "
" FAN" button is pressed while stopping.
To start/stop operation
To set the operation mode
G Operation mode setting
* A heat pump model that is not set up as an Administrative Indoor Unit cannot operate in the AUTO mode.
** FAN cannot be selected for a heat pump model.
Refer to details in the Administrative Indoor Unit OPERATING TIPS.
• If the priority mode is set to "Priority on Administrative Indoor Unit", the operating mode of other indoor units except
Administrative Indoor Unit will be controlled by an Administrative Indoor Unit.
• If the operating mode of Administrative Indoor Unit is set to "AUTO", "AUTO" is displayed in addition to the display of
current operating mode on other wired remote controllers except Administrative Indoor Unit. In this case, operation of
other indoor units is controlled by the Administrative Indoor Unit.
Example: When operating mode of the Administrative Indoor Unit is set to
"AUTO" while air conditioning setting. (The indication on other
wired remote controllers except Administrative Indoor Unit).
En-3
2
SU
(SUN)
SU MO TU WE TH FR SA SU MO TU WE TH FR SA
ex. Monday PM11:00
SU MO TU WE TH FR SA
SET BACK" button to switch between
MODE" button, the " SET TEMP.
Press the "START / STOP" button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Blinking of START/STOP LED means occurrence of an error. Please refer to "ERROR
CODE DISPLAY" in the manual.
Press the " MODE" button to select the operation mode.
*
(AUTO)
Press the "DAY / DAY OFF" button and select the current
day.
A appears around the selected day.
MO TU WE
(MON) (TUE) (WED)
Press the "
the current time.
Press repeatedly to adjust the current time in 1-
minute increments. Press and hold to adjust the
current time in 10-minute increments.
SU MO TU WE TH FR SA
" button or " SET TEMP.
(COOL) (DRY) (FAN)
TH FR SA
(THU) (FRI) (SAT)
" button or " " button to set
5
Press the " TIMER MODE /
CLOCK ADJUST" button
again to end.
**
(HEAT)
When Administrative
Indoor Unit is set to
"AUTO".
" button, the