Velux INTEGRA KUX 110 Bedienungsanleitung Seite 9

Resetting
The products connected can be reset by removing the lid of the
power supply unit and pressing the RESET button for at least
5 seconds.
When resetting, the connection between the mains-powered
product and wall switch KLI 310/311/312/313 is deleted and
a new pairing of the two products is required. See
velux.com/integrasupport for further guidance.
Note: The connected products will run briefly back and forth in
random order to indicate that they are ready for pairing.
min 5 sec
ENGLISH
9 VELUX
®