Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
To cancel the repeat function press the REPEAT button once more.
Numeric buttons
While listening toa CD a specific track number can be played by pressing the relative digit on the number button s.
Track 02 Press 2
Track 12 . Press 2 then 10+
Track 22 • Press 2 then 10+ twice
Random playback/ MP3CD
Follow the below instructies to playback all tracks on a CD in a random order.
During playback press the RANDOM button on the remote control to begin random playback.
Press the RANDOM button again to cancel random playback.
Intro playback/ MP3CD
Press the INTRO button during playback to play the first 10 seconds of all tracks on the disc.
When using the BT connection, you can listen to audio wirelessly from a BT audio device (For example an MP3 player) within
10 metres of the Micro System unit
Make sure you are in BT input mode (refer to page 20)
When selected the BT LINK text on the display will flash while the system tries to connect to previously paired devices. lf no
devices are found the BT LINK text will continue to flash to indicate it is ready for pairing a new device.
Enable the Bluetooth function on your audio device and search fora device labelled
V356D in the available list
Select and enable pairing for the V356D device. lf prompted for a password enter 0000
lf pairing is successful the micro system will play a melody and the BT LINK text will stop flashing.
lf the connected device goes out of range, the micro system will attempt to connect for 2 minutes. When the device comes
into range the unit will reconnect again automatically.
To remove a paired device using the micro system, press and hold the UNPAIR/ENTER button on the micro system or press the
UNPAIR button on the remote The BT LINK text will begin flashing again.
Note: lf you turn off either device before pairing is complete the process will need to be repeated when powered ON again.
NFC (Near Field Communication) enables short range wireless communications between compatible devices such as mobile
phones.
When enabled on the transmitting audio device; all that is required is fo r you to touch the NFC logo on the front of the micro
system with the NFC hotspot on your compatible audio device.
Enable NFC on your audio device (such as a mobile phone).
Touch the NFC hot spot on your audio device to the NFC logo on the front of the micro system.
12
Werbung
